SensiCLENE
Self-Cleaning
Technology
SensiCLENE is Halogen's patented self-cleaning system that uses a magnetically coupled impeller to continuously cycle proprietary polymer beads across the sensor electrodes and pH probe — preventing biofouling, mineral scaling, and chemical buildup that cause drift in conventional sensors. Set maintenance and reference-check intervals for the installed model and water conditions; self-cleaning does not eliminate those checks.
See Water Flow Around the Sensor
Watch the bubble demonstration for a closer look at water movement around the sensing area.
“The impeller creates a continuous cycle, ensuring the probe remains factory-clean for months.”
How SensiCLENE Works
At the core of SensiCLENE technology is a magnetically coupled impeller system. This built-in component continuously cycles proprietary polymer beads over the sensor's electrodes and pH probe.
This physical scrubbing action prevents bio-fouling, mineral scaling, and chemical build-up before it can impact data accuracy. By keeping the interface clean at all times, SensiCLENE eliminates the “sensor drift” that typically plagues chlorine and pH monitoring systems.
Quick Maintenance at Long Intervals
Industrial monitoring shouldn't require weekly attention. Cleaning beads are a routine consumable. Inspect the impeller and pH components and replace according to condition; extreme water conditions can shorten pH electrode life.
Screened Sensor Cover
Protects internal components from large debris while maintaining optimal flow rates for precision measurement.
Magnetically Coupled Impeller
No mechanical seals to fail. The contactless drive ensures leak-free operation and extreme durability in harsh environments.
SensiCLENE Polymer Beads
Custom-engineered media designed specifically for electrode scrubbing without causing abrasion to sensitive surfaces.
“Chlorine sensors typically are finicky, high-maintenance devices. Our SensiCLENE technology reduces maintenance and lengthens calibration stability.”
Applications That Benefit from Self-Cleaning
Remote Reservoir
Perfect for locations where maintenance visits are costly and logistically difficult.
End of Line Testing
Maintains consistent readings for final compliance checks in distribution networks.
Grid Monitoring
Scalable monitoring across municipal grids with minimal technician intervention required.
Cruise Ship Drinking Water
Reliable chlorine monitoring in isolated maritime environments where reliability is critical.
Airline Water Tanker Monitoring
Ensures safe water supplies for aviation fleets through automated, rugged monitoring.
EWR Monitoring
Effective monitoring for Environmental Water Reclamation and protection systems.
Frequently Asked Questions
What is SensiCLENE?
SensiCLENE is Halogen’s patented self-cleaning system that uses a magnetically coupled impeller to continuously cycle proprietary polymer beads across the sensor electrodes and pH probe, preventing biofouling, mineral scaling, and chemical buildup that causes sensor drift.
How long between maintenance intervals?
In most drinking water applications, sensors with SensiCLENE hold calibration for six months or more and require only an annual cleaning-bead replacement, which takes under five minutes and does not require recalibration. Other parts can last substantially longer than a year; inspect them and follow the model manual. Extreme water conditions may shorten pH electrode life.
Why do conventional chlorine sensors require frequent maintenance?
Traditional membrane-covered and bare-electrode sensors accumulate biofilm, mineral scale, and organic matter on their electrode surfaces, causing measurement drift. Without a self-cleaning mechanism, operators must manually clean and recalibrate sensors monthly or more frequently.
What wear parts does SensiCLENE use?
Only the polymer cleaning beads require annual replacement. The other wear parts — the screened sensor cover and magnetically coupled impeller — last many years. All can be swapped in under five minutes without specialized tools.
Does SensiCLENE affect sensor accuracy?
No. The continuous gentle scrubbing action keeps electrode surfaces clean without abrading them. Calibration remains stable, and the annual bead replacement does not require recalibration.
Ready to eliminate maintenance headaches?
Join hundreds of facilities that have switched to Halogen's self-cleaning monitoring solutions.
More Info