Solutions and Kits

MP5™ Panel Mounted Chlorine Analyzer

Overview

This package will clean up your instrumentation panel, bringing all the benefits of the MP5™ online multi-parameter analyzer to a single wall-mounted solution. The combo includes an MP5™ with the low-flange housing (H1LF-P) coupled with a mountable flow cell and an operator’s choice of 24VDC (D1) or 120-240VAC (CN-01) 4-20 display module all designed to mount on an included machined backplate.

Unique Features

5 Parameters in a single online near-time analyzer
- Free Chlorine
- pH
- Temperature
- Conductivity
- Rapid Response ORP™*
Self-cleaning & low maintenance
No membranes or electrolyte
NSF-61: No waste stream required
Factory calibrated, drift resistant
Flexible deployment types: directly into a wet tap valve, PVC tees, side stream, or submerged
The 4-20 display is equipped with (4) 20mA and MODBUS RTU. Other communication protocols are available upon request.
24 VDC or 90 to 240 VAC operation

Halogen MP5™ H1LF-P Only Chlorine Analyzer and panel-mount flow-cell attachment — MP5™ D-H1LF-P Flowcell & Base

FLow Cell version of the Chlorine Analyzer — MKIT - Panel Mount, D20, Flow Cell

D20 Controller (4) 4-20mA Outputs, 3 Relays, SD Card

Why Use the MP5™ On a Panel?

Multiple Parameters in a Small Footprint

With a single MP5™ multi-parameter analyzer, operators can measure free chlorine, pH, temperature, conductivity, and Rapid ORP in one compact package, freeing up wall space and lowering maintenance time.

SensiCLĒNE™ Patented Self-Cleaning Technology

The MP5™ is unaffected by flow or turbidity, so it can be used in deployments where flow or pressure spikes occur. In addition, the patented electrochemical cleaning SensiCLĒNE™ technology resists polarization and adsorption of organics. Motivated by the flow from the pump, captive polymer cleaning beads continuously abrade the sensor. This keeps the electrode surfaces, including the pH sensor, free from buildup, scaling, and biofouling. Solid metal electrodes last the life of the system.

No Waste Stream

Approved for NSF-61 usage, water tested by an MP5™ can be sent right back into a drinking water tank, so no water is wasted for testing.

Easy to Monitor

The local 4-20 display contains (4) 4-20mA outputs (and is MODBUS capable) allows for onsite viewing of parameters, troubleshooting, and calibration of up to 5 separate MP5™ units.

Ease of Service

The annual wear-parts maintenance (for the SensiCLĒNE™ beads) takes only minutes and does not affect calibration.

Manuals for Drinking Water & Wastewater Applications

Installation Manual

D20 Display/Controller & Sensor

D20 Display/Controller & Sensor for use in Drinking Water and Wastewater applications.

Operating Manual

MP5™ Chlorine Analyzer
& Display Operations

MP5 Online Chlorine Analyzer Manual (2024.06.12-v4.02) for use in Drinking Water and Wastewater applications.

Installation Manual

Wet-Tap Remover
Installation Manual

Installation Manual for MP5™ D-H1WT-P chlorine analyzer in Wet Tap deployment with remover tool

Installation Manual

SensiCLĒNE™ Wear Parts
Replacement Manual

Download the Wear Parts Replacement manual for the SensiCLĒNE™ self-cleaning technology in MP5™ Analyzers

MP5™ Models and Deployment Types

MP5™ H1 Wet Tap (H1WT)

The Wet Tap (or Hot Tap) housing can be deployed as a retractable direct pipe insertion for NSF-61 usage. No-leak retractor options are available.

MP5™ H1 Mid Flange (H1MF-p)

The mid-flange housing (H1MF-P) and the associated 2″ adapter sleeve and collar kit make for an easy sidestream NSF-61 PVC Tee deployment.

H1 Low FLANGE (H1LF-P)

The low-flange model (H1LF-P) can be used to replace existing control-board-mounted setups or used as an NSF-61 submerged in-tank analyzer.

MP5™ SOLUTIONS AND KITS

Panel-Mount Solution

Kit with flow-cell deployment (MKIT) and display controller along with a wall mounting plate, provides a drop-in upfit sensor replacement.

More Information

IOT Telemetry Solution

Battery power and remote telemetry for an MP5™ deployment. Use for outer grid monitoring, dead-ends, or other remote implementations.

More Information

Remote Monitoring

Leverage the dependability and low maintenance of the MP5™ for remote tank monitoring with battery power and remote telemetry.

More Information

Wet-Tap Inline Mount

Retractable remover kit for MP5™ wet-tap analyzer (H1WT-P) in water pipes allows for maintenance without interrupting flows.

More Information

Immersion Deployment

This deployment uses a water-proofed low-flange MP5™ (H1LF-P), a sourced boom and harness, or can simply be placed in a tank or trough.

More Information

PVC Tee Deployment

Combine a mid-flange MP5™ (H1MF-P) with an adapter sleeve—in PVC or Stainless steel—sized for deployments in a 2″ PVC tee.

More Information

Flow-cell Deployment

Fits low-flange MP5™ (H1LF-P) and adapts for side stream and control board usage based on which flow cell type is ordered.

More Information

4-20 Display Options

Both 24V DC (DC20-L) and 120-240V AC (DC20-H) versions feature (4) 4-20 mA analog outputs, and an M-12 Connector, 3 relays, SD card.

More Information

Have Questions? Get Answers.

If the technologies and benefits listed above raise any questions, you may find the answer you’re looking for in the FAQ or Technologies pages.

Our contact page also allows you to reach out with a specific question and we’ll get back to you as quickly as possible.