- Centro de informaciónHalógeno SensiCLĒNE™ El MP5™ se creó con las calibraciones estables y el bajo mantenimiento como requisitos prioritarios. Para ello,...Real Talk about "Continuous Monitoring" Chlorine Analyzer claims Some manufacturers of online chlorine analyzers are making bold claims...
- Industrias y aplicacionesMarítimo y aviación
Agua potable
Control de aeropuertos y aviones
Control de las fuentes de entrada
Control de camiones cisterna
INDUSTRIALTransformación industrial
- ProductosHalógeno SensiCLĒNE™ El MP5™ fue creado con calibraciones estables y...Real Talk about "Continuous Monitoring" Chlorine Analyzer claims Algunos fabricantes...
- Contacte con
MP5™ Panel Mounted Chlorine Analyzer
Overview
This package will clean up your instrumentation panel, bringing all the benefits of the MP5™ online multi-parameter analyzer to a single wall-mounted solution. The combo includes an MP5™ with the low-flange housing (H1LF-P) coupled with a mountable flow cell and an operator’s choice of 24VDC (D1) or 120-240VAC (CN-01) 4-20 display module all designed to mount on an included machined backplate.
Contact us for more details.
Unique Features
- 5 Parameters in a single online near-time analyzer
- Cloro libre
- pH
- Temperatura
- Conductividad
- Rapid Response ORP™*
- Self-cleaning & low maintenance
- Sin membranas ni electrolitos
- NSF-61: No waste stream required
- Factory calibrated, drift resistant
- Flexible deployment types: directly into a wet tap valve, PVC tees, side stream, or submerged
- The 4-20 display is equipped with (4) 20mA and MODBUS RTU. Other communication protocols are available upon request.
- 24 VDC or 90 to 240 VAC operation
Why Use the MP5™ On a Panel?
Multiple Parameters in a Small Footprint
With a single MP5™ multi-parameter analyzer, operators can measure free chlorine, pH, temperature, conductivity, and Rapid ORP in one compact package, freeing up wall space and lowering maintenance time.
SensiCLĒNE™ Patented Self-Cleaning Technology
The MP5™ is unaffected by flow or turbidity, so it can be used in deployments where flow or pressure spikes occur. In addition, the patented electrochemical cleaning SensiCLĒNE™ technology resists polarization and adsorption of organics. Motivated by the flow from the pump, captive polymer cleaning beads continuously abrade the sensor. This keeps the electrode surfaces, including the pH sensor, free from buildup, scaling, and biofouling. Solid metal electrodes last the life of the system.
No Waste Stream
Approved for NSF-61 usage, water tested by an MP5™ can be sent right back into a drinking water tank, so no water is wasted for testing.
Easy to Monitor
The local 4-20 display contains (4) 4-20mA outputs (and is MODBUS capable) allows for onsite viewing of parameters, troubleshooting, and calibration of up to 5 separate MP5™ units.
Ease of Service
The annual wear-parts maintenance (for the SensiCLĒNE™ beads) takes only minutes and does not affect calibration.
Manuals for Drinking Water & Wastewater Applications
Installation Manual
D20 Display/Controller & Sensor for use in Drinking Water and Wastewater applications.
Operating Manual
MP5 Online Chlorine Analyzer Manual (2024.06.12-v4.02) for use in Drinking Water and Wastewater applications.
Installation Manual
Installation Manual for MP5™ D-H1WT-P chlorine analyzer in Wet Tap deployment with remover tool
Installation Manual
Download the Wear Parts Replacement manual for the SensiCLĒNE™ self-cleaning technology in MP5™ Analyzers
MP5™ Models and Deployment Types
MP5™ H1 Wet Tap (H1WT)
The Wet Tap (or Hot Tap) housing can be deployed as a retractable direct pipe insertion for NSF-61 usage. No-leak retractor options are available.
MP5™ H1 Mid Flange (H1MF-p)
The mid-flange housing (H1MF-P) and the associated 2″ adapter sleeve and collar kit make for an easy sidestream NSF-61 PVC Tee deployment.
H1 Low FLANGE (H1LF-P)
The low-flange model (H1LF-P) can be used to replace existing control-board-mounted setups or used as an NSF-61 submerged in-tank analyzer.
MP5™ SOLUTIONS AND KITS
Kit with flow-cell deployment (MKIT) and display controller along with a wall mounting plate, provides a drop-in upfit sensor replacement.
Battery power and remote telemetry for an MP5™ deployment. Use for outer grid monitoring, dead-ends, or other remote implementations.
Leverage the dependability and low maintenance of the MP5™ for remote tank monitoring with battery power and remote telemetry.
Retractable remover kit for MP5™ wet-tap analyzer (H1WT-P) in water pipes allows for maintenance without interrupting flows.
This deployment uses a water-proofed low-flange MP5™ (H1LF-P), a sourced boom and harness, or can simply be placed in a tank or trough.
Combine a mid-flange MP5™ (H1MF-P) with an adapter sleeve—in PVC or Stainless steel—sized for deployments in a 2″ PVC tee.
Fits low-flange MP5™ (H1LF-P) and adapts for side stream and control board usage based on which flow cell type is ordered.
Both 24V DC (DC20-L) and 120-240V AC (DC20-H) versions feature (4) 4-20 mA analog outputs, and an M-12 Connector, 3 relays, SD card.
¿Tiene preguntas? Obtenga respuestas.
If the technologies and benefits listed above raise any questions, you may find the answer you’re looking for in the FAQ or Technologies pages.
Our contact page also allows you to reach out with a specific question and we’ll get back to you as quickly as possible.