Solutions and Kits

Halogen 4-20 Display for the MP5™ Online Chlorine Analyzer


Halogen displays are Available in 24DAC (model D-1) and 120-240VAC (Model CN-01). Both models contain (4) 4-20 outputs and a MODBUS RTU and employ an M-12 connector and train relief,  

A soon-to-be-released model (D20) includes data caching and analyzer control via SD cards as well as new multiparameter readout. Contact us for details.

Unique Features

  • Display all parameters  (Free Chlorine, pH, Temperature,Conductivity, Rapid Response ORP™) from up to five MP5™ online chlorine analyzers in one display.
  • System is equipped with 4 20mA outputs nd MODBUS RTU. Other communication protocols are available upon request.
  • 24 VDC or 90 to 240 VAC operation

Manuals for Drinking Water & Wastewater Applications

Operating Manual

MP5 Online Chlorine Analyzer Manual (7.11.22-v3.0) for use in Drinking Water and Wastewater applications.

Installation Manual

Installation Manual for MP5™ D-H1WT-P chlorine analyzer in Wet Tap deployment with remover tool  

Installation Manual

Download the Wear Parts Replacement manual for the SensiCLĒNE™ self-cleaning technology in MP5™ Analyzers

Monitor 5 parameters directly in drinking water pipes at flows from 0- 4m/s & up to 10 bar/150 psi. A retractor/removal tool is available (pictured at left). Wet Tap (or Hot Tap) housing can be deployed as a retractable NSF-61 in-pipe Chlorine analyzer.

The mid-flange housing (H1MF-P) and the associated 2″ adapter sleeve and collar kit make for an easy sidestream NSF-61 PVC Tee deploymentThis configuration fits an OTS 2” PVC Tee and requires a  threaded adapter (PT-01). 

The low-flange model (H1LF-P) adapts for side-stream monitoring to replace an existing control-board-mounted sensor or can be submerged in a clearwell. Submersible deployments use a standard 1” PVC Boom Mount. Flow Cell optional. 


Kit with flow-cell deployment (H1LF-P) and display controller  along with a wall mounting plate,  provides a drop-in upfit sensor replacement.

More Information

Battery power and remote telemetry for an MP5™ deployment. Use for outer grid monitoring, dead-ends, or other remote implementations.

More Information

Leverage the dependability and low maintenance of the MP5™ for remote tank monitoring with battery power and remote telemetry.

More Information

Retractable remover kit for MP5™ wet-tap analyzer (H1WT-P) in water pipes allows for maintenance without interrupting flows.

More Information

This deployment uses a water-proofed low-flange MP5™ (H1LF-P), a sourced boom and harness, or can simply be placed in a tank or trough.

More Information

Combine a mid-flange MP5™ (H1MF-P) with an adapter sleeve—in PVC or Stainless steel—sized for deployments in a 2″ PVC tee.

More Information

Fits low-flange MP5™ (H1LF-P) and adapts for side stream and control board usage based on which flow cell type  is ordered. 

More Information

Both 24V DC (D1) and 120-240V AC (CN-01) versions feature (4) 4-20 Ma analog outputs, and an M-12 Connector with stress relief. 

More Information

Have Questions? Get Answers.

If the technologies and benefits listed above raise any questions, you may find the answer you’re looking for in the FAQ or Technologies pages. 

Our contact page also allows you to reach out with a specific question and we’ll get back to you as quickly as possible.