Solutions and Kits

MP5™ Online Chlorine Analyzer for Flow Cell Deployment​

Overview

The Halogen MP5™ low-flange housing (D-H1LF-P) allows the sensor to be used with a flow-cell (with or without a flat base) providing continuous monitoring with a fast cycle time. The MP5™ is unaffected by flow or pressure so it can be deployed without any flow control plumbing.

The MP5™ is the only chlorine analyzer certified for NSF-61 use in drinking water with no required waste stream.  The small footprint and multiparameter capability make this deployment a good choice for freeing up space, especially when combined with the Halogen Panel Mount Solution (MKIT-1001).

Unique Features

  • 5 Parameters in a single online near-time analyzer
    • Free Chlorine
    • pH
    • Temperature
    • Conductivity
    • Rapid Response ORP™*
  • Self-cleaning & low maintenance
  • No membranes or electrolyte
  • NSF-61: No waste stream required
  • Factory-calibrated, drift resistant
  • Unaffected by flow or pressure. No flow-control plumbing needed.
  • Available display equipped with (4) 20mA and MODBUS RTU. Other communication protocols are available upon request.
  • 24 VDC or 90 to 240 VAC operation
Contact Us
Halogen MP5™ H1LF-P Only Chlorine Analyzer and panel-mount flow-cell attachment
MP5™ D-H1LF-P Flowcell & Base
Halogen MP5™ H1LF-P Only Chlorine Analyzer and a flow-cell attachment
MP5™ D-H1LF-P Flowcell
Halogen D1 4-20 display with 4 20mA outputs and MODBUS RTU.
Halogen D-1 Display
SensiCLENE Animated demo
SenisCLĒNE demonstration
Halogen deployment housings display
Halogen MKT Panel Mount Kit for the MP5™ Online Chlorine Analyzer and 4-20 display
MKT001 Board with Flowcell Option

Why Use the MP5™ in a Flow-cell Deployment?

Flow Independent Measurement 

The MP5™ online chlorine monitor is unaffected by flow or pressure so there’s no need for flow-control valves or plumbing. The integrated pump creates a fixed velocity across the electrodes, which improves sensitivity while lowering the Signal-to-Noise Ratio.

No Waste Stream

Approved for NSF-61 usage, the water analyzed by MP5™ can be put back into the water supply.

Easy Monitoring

A local display provides onsite viewing of parameters for up to 5 separate MP5™ units.

SensiCLĒNE™ Patented Self-Cleaning Technology

A patented electrochemical cleaning method called SensiCLĒNE™  resists polarization and adsorption of organics.  Motivated by the flow from the pump, captive polymer cleaning beads continuously abrade the sensor. This keeps the electrode surfaces, including the pH sensor, free from buildup, scaling, and biofouling. Solid metal electrodes last the life of the system. 

This self-cleaning technology means the MP5™ holds calibration much longer than any competing sensor, whether amperometric or DPD. 

Ease of Service

The annual wear-parts maintenance replaces the SensiCLĒNE™ beads, retaining cap and two screws. The process takes only minutes and does not affect calibration. 

Contact Us

Manuals for Drinking Water & Wastewater Applications

Installation Manual

D20 Display/Controller & Sensor

D20 Display/Controller & Sensor for use in Drinking Water and Wastewater applications.

Operating Manual

MP5™ Chlorine Analyzer 
& Display Operations

User Manual for the MP5 Chlorine analyzer

MP5 Online Chlorine Analyzer Manual (2024.06.12-v4.02) for use in Drinking Water and Wastewater applications.

Installation Manual

Wet-Tap Remover
Installation Manual

Wet-tap retraction and removal manual for the Halogen MP5™ in-pipe online chlorine analyzer

Installation Manual for MP5™ D-H1WT-P chlorine analyzer in Wet Tap deployment with remover tool  

Installation Manual

SensiCLĒNE™ Wear Parts 
Replacement Manual

Wear Parts replacement manual for SensiCLĒNE™ system on the MP5™ Chlorine Analyzer

Download the Wear Parts Replacement manual for the SensiCLĒNE™ self-cleaning technology in MP5™ Analyzers

Configuration & Deployment Types

Wet Tap, Direct Monitoring

NSF-61 Direct Insertion Drinking Water Chlorine Sensor deployment

Monitor 5 parameters directly in drinking water pipes at flows from 0- 4m/s & up to 10 bar/150 psi. A retractor/removal tool is available (pictured at left). Wet Tap (or Hot Tap) housing can be deployed as a retractable NSF-61 in-pipe Chlorine analyzer.

PVC TEE (MID-FLANGE) Configuration

Halogen MP5 Drinking Water Chlorine Sensor in PVC Tee Deployment

The mid-flange housing (H1MF-P) and the associated 2″ adapter sleeve and collar kit make for an easy sidestream NSF-61 PVC Tee deployment. This configuration fits an OTS 2” PVC Tee and requires a  threaded adapter (PT-01). 

Submersible & Flow-cell Options

Halogen MP5 amperometric chlorine sensor NSF-61 Submersion and Flow-cell deployments

The low-flange model (H1LF-P) adapts for side-stream monitoring to replace an existing control-board-mounted sensor or can be submerged in a clearwell. Submersible deployments use a standard 1” PVC Boom Mount. Flow Cell optional. 

MP5™ SOLUTIONS AND KITS

Panel-Mount Solution

FLow Cell version of the Chlorine Analyzer

Kit with flow-cell deployment (MKIT) and display controller along with a wall mounting plate,  provides a drop-in upfit sensor replacement.

More Information

IOT Telemetry Solution

Battery power and remote telemetry for an MP5™ deployment. Use for outer grid monitoring, dead-ends, or other remote implementations.

More Information

Remote Monitoring

Leverage the dependability and low maintenance of the MP5™ for remote tank monitoring with battery power and remote telemetry.

More Information

Wet-Tap Inline Mount

MP5™ Wet-tap in-pipe retractable Chlorine analyzer and removal tool

Retractable remover kit for MP5™ wet-tap analyzer (H1WT-P) in water pipes allows for maintenance without interrupting flows.

More Information

Immersion Deployment

Waterproof MP5™ online chlorine analyzer for immersion deployments approved for NSF-61 use

This deployment uses a water-proofed low-flange MP5™ (H1LF-P), a sourced boom and harness, or can simply be placed in a tank or trough.

More Information

PVC Tee Deployment

Combine a mid-flange MP5™ (H1MF-P) with an adapter sleeve—in PVC or Stainless steel—sized for deployments in a 2″ PVC tee.

More Information

Flow-cell Deployment

MP5™ Low-flange chlorine analyzer for immersion or flow-cell deployment

Fits low-flange MP5™ (H1LF-P) and adapts for side stream and control board usage based on which flow cell type  is ordered. 

More Information

4-20 Display Options

DC20 - Controller for Halogen Systems Chlorine Analyzer

Both 24V DC (DC20-L) and 120-240V AC (DC20-H) versions feature (4) 4-20 mA analog outputs, and an M-12 Connector, 3 relays, SD card. 

More Information

Halogen Systems Inc's Chlorine Analyzers and Controller

Have Questions? Get Answers.

If the technologies and benefits listed above raise any questions, you may find the answer you’re looking for in the FAQ or Technologies pages. 

Our contact page also allows you to reach out with a specific question and we’ll get back to you as quickly as possible.

FAQs
The Tech
Contact