Remote Chlorine Analyzer for 
Drinking Water Applications

The stable calibration and self-cleaning technology in the MP5™ chlorine sensor enable reliable low-maintenance remote tank and water grid monitoring.

Use the NSF-61 capable MP5 chlorine analyzer to monitor chlorine and other parameters at remote tanks, distribution trunks, or end-of-line areas in the water grid.

Because traditional chlorine sensors require frequent maintenance, analyzing chlorine residuals across a water grid or in remote tanks has long been a highly manual process, requiring truck roll-outs and grabbing samples.  

Unlike maintenance-intensive sensors, Halogen’s MP5™ Chlorine Sensor is self-cleaning and has been shown to maintain stable calibration for months in drinking water applications. In addition, the MP5™ is the only chlorine analyzer approved for NSF-61 use in drinking water tanks or pipes with no required waste stream.

Halogen has remote monitoring solutions that combine any MP5 with a battery and cellular-enabled remote telemetry. For remote tank operations, the MP5™ can be suspended in a tank, inserted in the fill pipe, or deployed at the outflow. In a similar fashion, MP5™ sensors can be deployed throughout a water grid without needing the electrical grid.

Operators can measure free chlorine, pH, temperature, conductivity, and ORP at nearly any point in the grid that has a cell signal. 

Remote Monitoring with the MP5™ Chlorine Analyzer

Halogen Systems Inc's Chlorine Analyzers and Controller

5 PARAMETERS IN ONE UNIT

The NSF-61 certified, Halogen MP5™ measures 5 testing parameters in near-time using one online unit without losing a drop of treated water. Operators can assess free chlorine, pH, temperature, conductivity, and oxidation-reduction potential (ORP) in near-time in the pipe with no waste stream.

FLEXIBLE DEPLOYMENT OPTIONS

The MP5™ analyzer makes things simple. Our NSF-61 certification means no flow-control plumbing and no waste stream to mitigate. There are no reagents or membranes to stock, manage, or replace. Instead, you’ll replace the cap, cleaning beads, and impeller blade once per year in 5 minutes without affecting the calibration.

Sensor de cloro halógeno MP5 NSF-61 No se ve afectado por el caudal ni la presión

UNAFFECTED BY PRESSURE OR FLOW

El MP5™ se adapta a casi cualquier caudal o presión. Ni siquiera una tubería seca arruinará la calibración. Puede instalarse directamente en una tubería, situarse a un lado de la corriente, suspenderse en un canal o simplemente dejarse caer en un depósito. Sea cual sea el tipo de despliegue o los parámetros, el MP5™ es único en precisión, fiabilidad y estabilidad.

Sensores amperométricos con tecnología patentada para modernizar sus pruebas

Bare Electrode Sensor

Amperometric Sensors have many advantages over the older membrane and reagent technology.  Halogen’s implementation of bare 3-electrode amperometric technology provides pH-stabilized precise measurements of Free Chlorine without introducing additional complexity to your workflow.

Self Cleaning

The old amperometric technology used by competitor sensors still requires a membrane and electrolyte to guard against sensor fouling. Such membranes are sensitive to flow and pressure spikes. Halogen’s patented SensiCLĒNE™ technology prevents fouling without introducing pressure or flow sensitivity.

MP5™ SOLUTIONS AND KITS

Kit with flow-cell deployment (MKIT) and display controller along with a wall mounting plate,  provides a drop-in upfit sensor replacement.

More Information

Battery power and remote telemetry for an MP5™ deployment. Use for outer grid monitoring, dead-ends, or other remote implementations.

More Information

Leverage the dependability and low maintenance of the MP5™ for remote tank monitoring with battery power and remote telemetry.

More Information

Retractable remover kit for MP5™ wet-tap analyzer (H1WT-P) in water pipes allows for maintenance without interrupting flows.

More Information

This deployment uses a water-proofed low-flange MP5™ (H1LF-P), a sourced boom and harness, or can simply be placed in a tank or trough.

More Information

Combine a mid-flange MP5™ (H1MF-P) with an adapter sleeve—in PVC or Stainless steel—sized for deployments in a 2″ PVC tee.

More Information

Fits low-flange MP5™ (H1LF-P) and adapts for side stream and control board usage based on which flow cell type  is ordered. 

More Information

Both 24V DC (DC20-L) and 120-240V AC (DC20-H) versions feature (4) 4-20 mA analog outputs, and an M-12 Connector, 3 relays, SD card. 

More Information

Halogen Systems Inc's Chlorine Analyzers and Controller

¿Tiene preguntas? Obtenga respuestas.

If the technologies and benefits listed above raise any questions, you may find the answer you’re looking for in the FAQ or Technologies pages. 

Our contact page also allows you to reach out with a specific question and we’ll get back to you as quickly as possible.