Halogen Amperometric Chlorine Analyzer
Industry Applications

Aplicaciones industriales de los sensores halógenos amperométricos de cloro

Halogen Systems produce sensores amperométricos de cloro que son útiles en una variedad de industrias y aplicaciones. Nuestras principales áreas de interés (y algunas en las que estamos trabajando) son las siguientes.

Sistemas de gestión del agua de lastre (BWMS) Sensores de cloro

La línea de sensores halógenos TRO está disponible en los tipos de instalación de Inserción Directa en Tubería o de Corriente Lateral. Los TRO halógenos ofrecen muchas ventajas, como: 

  • Menores costes de instalación y mantenimiento
  • Flujo independiente
  • Respuesta rápida
  • Rendimiento fiable
  • Largos intervalos entre calibraciones
  • Funciona de -2°C a 35°C
  • Instalación del grifo caliente
  • La válvula de grifo caliente permite la extracción sin vaciar el tubo de lastre
  • No hay vertido de reactivos ni flujo de residuos
  • Autolimpieza

Drinking-water distribution systems present unique challenges for residual chlorine sensors. The MP5 is unique among chlorine analyzers because it is the only Chlorine Sensor approved for NSF-61 installations. This means it can be installed directly in a drinking water pipe with no required waste stream, making it a great choice for remote tanks, distribution hubs, and end-of-line sampling applications. Plus, it takes the water wasted for testing to zero. Other benefits of the Halogen MP5™ Chlorine Sensor are:

 

  • Certificado NSF-61 (sin flujo de residuos)
  • Sin membranas ni reactivos
  • Funcionamiento desatendido a largo plazo
  • Funcionamiento y precisión con caudales variables
  • Bajo coste de explotación
  • Compatible con sistemas SCADA
  • Rendimiento fiable
  • Hot Tap or Wet Tap Installation for immersion into a pipe
  • Sensor de cloro de por vida
  • Meses entre calibraciones
  • Sensor de pH diferencial (con una vida útil de 2 a 3 años)

El analizador de cloro Halogen MP5™ mide cinco parámetros en un paquete integrado. Utiliza tecnología patentada que mantiene una calibración estable durante meses a pesar de entornos complejos como la recuperación de agua. 

We use bare electrodes, eliminating the need to replace clogged membranes or replenish electrolyte as required by conventional chlorine amperometric sensors.  Flow-independent, and unaffected by pressure, the MP5™ analyzer allows for multiple installation options: direct-pipe insertion, side-stream (for drop-in replacement of membrane & reagent sensors), mounted on a boom, or even submerged. 

A wastewater version of the chlorine analyzer is in testing environments now with a mid to late 2023 general release target.

Other Industry Applications Coming Soon:

Supervisión de piscinas y spas comerciales

Halogen Systems Free Chlorine sensor uses the amperometric technique (PPM) and is ideally suited for use in swimming pools. Since many operators are accustomed to using the ORP methodology, the Swimming Pool Controller displays both ORP and PPM chlorine by default. The ORP method uses a patent-pending method Rapid Response ORP™ prevents absorption of organics when high levels of cyanuric acid are present (see below).

A multiparameter chlorine sensor that measures the following parameters:

  • Cloro libre
  • pH
  • ORP™ de respuesta rápida
  • Conductividad
  • Temperatura

Ningún otro sensor posee estas cualidades:

  • Electrodos autolimpiables
  • Funcionamiento independiente del flujo
  • Sensor de cloro de larga duración
  • Cartucho de pH reemplazable
  • Bajo mantenimiento
  • Sin reactivos, electrolitos ni membranas

Torres de refrigeración comerciales

This application is in partner trials. Ask your rep for the current status. 

Cooling towers are notoriously difficult applications for chlorine sensors and bromine sensors.
Many systems operate at high cycles of concentration due to the conductivity and hardness found in water. To slow the formation of build-up, many operators use film-forming corrosion inhibitors. The resulting organic contaminants make it difficult to read chlorine levels in the system’s water. HSI’s MP5™ chlorine sensor is ideally suited for these challenging applications. Not only can it measure both chlorine and bromine, but it is also self-cleaning. Its built-in conductivity sensor can eliminate several discrete sensors. 

Control del agua caliente sanitaria

This application is in partner trials. Ask your rep for the current status.

Hot water systems can be a hotbed for Legionella and other harmful bacteria. While these sources of infection can be easily treated by chlorine, the means of testing can be problematic and overly manual. The small footprint and flexible installation options granted by a solution based on the MP5™ amperometric chlorine analyzer can make consistent monitoring easy. The MP5™ can tolerate high temperatures and doesn’t rely on consistent flow. Plus it doesn’t add any additional chemicals to the stream. Contact your rep today to ask about the upcoming Halogen solution.