할로겐 시스템은 다양한 산업 및 응용 분야에서 유용한 전류 측정용 염소 센서를 생산합니다. 당사의 주요 초점 분야(그리고 현재 연구 중인 일부 분야)는 다음과 같습니다.
할로겐 TRO 센서 라인은 직접 파이프 삽입 또는 사이드 스트림 설치 유형 모두에서 사용할 수 있습니다. 할로겐 TRO는 다음과 같은 많은 이점을 제공합니다:
Drinking-water distribution systems present unique challenges for residual chlorine sensors. The MP5 is unique among chlorine analyzers because it is the only Chlorine Sensor approved for NSF-61 installations. This means it can be installed directly in a drinking water pipe with no required waste stream, making it a great choice for remote tanks, distribution hubs, and end-of-line sampling applications. Plus, it takes the water wasted for testing to zero. Other benefits of the Halogen MP5™ Chlorine Sensor are:
Halogen MP5™ 염소 분석기는 하나의 통합 패키지로 5가지 파라미터를 측정합니다. 이 제품은 매립과 같은 복잡한 환경에서도 수개월 동안 안정적인 캘리브레이션을 유지하는 독점 기술을 사용합니다.
We use bare electrodes, eliminating the need to replace clogged membranes or replenish electrolyte as required by conventional chlorine amperometric sensors. Flow-independent, and unaffected by pressure, the MP5™ analyzer allows for multiple installation options: direct-pipe insertion, side-stream (for drop-in replacement of membrane & reagent sensors), mounted on a boom, or even submerged.
A wastewater version of the chlorine analyzer is in testing environments now with a mid to late 2023 general release target.
Halogen Systems Free Chlorine sensor uses the amperometric technique (PPM) and is ideally suited for use in swimming pools. Since many operators are accustomed to using the ORP methodology, the Swimming Pool Controller displays both ORP and PPM chlorine by default. The ORP method uses a patent-pending method Rapid Response ORP™ prevents absorption of organics when high levels of cyanuric acid are present (see below).
A multiparameter chlorine sensor that measures the following parameters:
다른 센서에는 이러한 특성이 없습니다:
This application is in partner trials. Ask your rep for the current status.
Cooling towers are notoriously difficult applications for chlorine sensors and bromine sensors.
Many systems operate at high cycles of concentration due to the conductivity and hardness found in water. To slow the formation of build-up, many operators use film-forming corrosion inhibitors. The resulting organic contaminants make it difficult to read chlorine levels in the system’s water. HSI’s MP5™ chlorine sensor is ideally suited for these challenging applications. Not only can it measure both chlorine and bromine, but it is also self-cleaning. Its built-in conductivity sensor can eliminate several discrete sensors.
This application is in partner trials. Ask your rep for the current status.
Hot water systems can be a hotbed for Legionella and other harmful bacteria. While these sources of infection can be easily treated by chlorine, the means of testing can be problematic and overly manual. The small footprint and flexible installation options granted by a solution based on the MP5™ amperometric chlorine analyzer can make consistent monitoring easy. The MP5™ can tolerate high temperatures and doesn’t rely on consistent flow. Plus it doesn’t add any additional chemicals to the stream. Contact your rep today to ask about the upcoming Halogen solution.