NSF-61 Certified and EPA Method 334.0 Compliant, Halogen’s MP5™ sensor sets a new standard for amperometric chlorine analyzers. Unaffected by flow or pressure and needing no waste stream, the MP5™ allows for many different installation and monitoring alternatives.
“In 40 years of Drinking Water plant experience, I have never seen anything as impressive as the MP5™. The flexibility, functionality, and stability are unmatched. Period.”
– Drinking Water Systems Engineer
Halogen 的 MP5™ 传感器通过了 NSF-61 认证，符合 EPA 334.0 方法，为安培氯分析仪设定了新标准。MP5™ 不受流量或压力变化的影响，不需要废液流，因此操作人员可以采用多种不同的安装和监测方法。
It can be inserted directly into a pipe, installed in a PVC tee, immersed in a clearwell, or simply dropped into a tank. An optional battery-powered package and existing telemetry options create the ultimate remote monitoring solution, allowing you to monitor dead ends, water quality hot spots, and water aging without wasting treated water.
我们的标准套餐见下文。也可根据环境/植物的具体需要定制套餐。
No matter the process control, old-tech analyzers incur significant costs, weighing your budget down with flow control, tubing kits, membranes, reagents, and the time spent on maintenance and calibrations. The sooner the old tech is replaced, the faster savings are recouped.
一台MP5™运行一年的费用是多少？第一年的运行成本约为200美元。该设备在出厂时已经校准，在几分钟内就能稳定下来，并能保持数月的校准。不需要购买膜或试剂，也很少需要维护。
MP5™不需要储存或更换膜或试剂，也不需要复杂的流量控制管道，甚至不需要排污管道，它使事情变得简单。工程师和操作人员都很欣赏其灵活的安装方式、低维护要求和显著的校准稳定性。
The MP5™ is the only Chlorine Sensor certified for NSF-61 in-pipe installations for drinking water with no waste stream and is EPA Method 334.0 compliant. Drinking water plants can save millions of gallons of treated water per year with approved compliance monitoring and reporting.
安装后，卤素设备的运行成本是一般DPD或使用膜和试剂的传感器的一小部分。没有膜或试剂需要购买和储存，没有持续的校准要求，也没有复杂的流量控制管道需要维护。
The MP5™ has a small footprint, is flow independent, and is NSF-61 compliant. Operators can insert a sensor in a pipe or PVC tee, suspend it in a trough, or simply drop it in a tank. Remote monitoring kits further expand installation options so boards like the one above can be cleaned up and cleared out.
Monitor 5 parameters directly in drinking water pipes at flows from 0- 4m/s & up to 10 bar/150 psi. A retractor/removal tool is available (pictured at left). Wet Tap (or Hot Tap) housing can be deployed as a retractable NSF-61 in-pipe Chlorine analyzer.
The mid-flange housing (H1MF-P) and the associated 2″ adapter sleeve and collar kit make for an easy sidestream NSF-61 PVC Tee deployment. This configuration fits an OTS 2” PVC Tee and requires a threaded adapter (PT-01).
The low-flange model (H1LF-P) adapts for sidestream monitoring and can replace an existing control-board-mounted sensor, or be submerged in clearwell. Optional Flow Cell kit. Submersible deployments use a standard 1” PVC Boom Mount.