The Halogen MP5™

NSF-61 Certified and EPA Method 334.0 Compliant, Halogen’s MP5™ sensor sets a new standard for amperometric chlorine sensors. Unaffected by flow or pressure and needing no waste stream, the MP5™ allows for many different installation and monitoring alternatives.

“In 40 years of Drinking Water plant experience, I have never seen anything as impressive as the MP5™. The flexibility, functionality, and stability are unmatched. Period.” – DW Systems Engineer

The New Standard in Amperometric Chlorine Sensors

NSF-61 Certified and EPA Method 334.0 Compliant, Halogen’s MP5™ sensor sets a new standard for amperometric chlorine sensors. Unaffected by flow or pressure and needing no waste stream, the MP5™ allows for many different installation and monitoring alternatives.

It can be inserted directly into a pipe, installed in a PVC tee, immersed in a clearwell,  or simply dropped into a tank. An optional battery-powered package and existing telemetry options create the ultimate remote monitoring solution, allowing you to monitor dead ends, water quality hot spots, and water aging.

See below for our standard packages. Custom packages tailored to environment/plant-specific needs are available.

Replace Multiple Sensors with One, While Cutting Membranes, Reagents & Maintenance.

Old-Technology Sensors Are Costing You

No matter the process control, old-tech analyzers incur significant costs, weighing your budget down with flow-control, tubing kits, membranes, reagents, and the time spent on maintenance and calibrations. The sooner the old-tech is replaced, the faster  savings are recouped.

The MP5™ Reduces TCO

How much does it cost to run an MP5™ for a year? First-year operating costs are approximately $200. The unit arrives factory-calibrated, stabilizes in minutes, and holds calibration for many months. There are no membranes or reagents to buy and very little maintenance is required. 

Halogen Systems, Inc - MP5 NSF-61 Amperometric Chlorine Sensor lineup

Add Simplicity, Gain Flexibility

With no membranes or reagents to stock or replace, and no need for complicated flow-control piping or even waste lines, an MP5™ makes things easy.. Engineers and operators alike appreciate the flexible installation options, low maintenance requirements, and remarkable calibration stability.

Top Reasons Drinking Water Plant Managers Choose the MP5™

NSF-61 and EPA 334.0

The MP5™ is the only Chlorine Sensor certified for NSF-61 in-pipe installations for drinking water with no waste stream and is EPA Method 334.0 compliant. This results in millions of gallons of water saved per year with the added bonus of approved compliance monitoring and reporting. 

Even the Accountant Approves

After installation, the cost to run Halogen Equipment is a fraction of the average DPD or sensors using membranes and reagents. There’s no membrane or reagent to purchase and stock, no constant calibration required, and no complicated flow-control piping to install or maintain.

Complicated Control Board

Simple & Flexible Installations

Because the MP5™ has a small footprint, generates its own flow, and is NSF-61 compliant, operators can insert a sensor in a pipe or PVC tee, suspend it in a trough, or simply drop it in a tank. Remote monitoring kits further expand installation options so boards like the one above can be cleared.

Configuration & Deployment Types

NSF-61 Direct Insertion Drinking Water Chlorine Sensor deployment

Wet Tap, Direct Monitoring

Monitor 5 parameters at flows from 0- 4m/s & up to 10 bar/150 psi. A removal tool is available (pictured at left) for both drinking water (D-H1WT-P) and Wastewater (W-H1WT-P) versions.

Halogen MP5 Drinking Water Chlorine Sensor in PVC Tee Deployment

PVC TEE (MID-FLANGE) Config

Specifically designed for PVC tee installs, this configuration requires a 2” PVC Tee and Adapter (PT-01). Both Drinking Water (D-H1MF-P) and Wastewater versions (W-H1MF-P) are available.

Halogen MP5 amperometric chlorine sensor NSF-61 Submersion and Flow-cell deployments

Flow-cell & Submersible Options

Sidestream deployments require the FC-02 Flow Cell (shown left). Submersible deployments use a standard 1” PVC Boom Mount for drinking water (D-H1LF-P) and Wastewater (W-H1LF-P).

A New Technology for Water Monitoring, Proven in the Toughest Environments

The MP5™ handles tough environments because it was created for even tougher ones.

With patented tech created to solve the environmental impact issues dogging the maritime shipping industry, Halogen has created a solution that solves problems water treatment and monitoring plants had written off as “the way things are.” The Halogen MP5™ is designed to let plant operators work within a new paradigm. What could your plant’s team do with found-money maintenance budgets and freed-up manpower? We’d say you just found a way to pay for the infrastructure that limited budgets put out of reach.