MP5™ 塩素分析計

NSF-61 Certified and EPA Method 334.0 Compliant, Halogen’s MP5™ sensor sets a new standard for amperometric chlorine analyzers. Unaffected by flow or pressure and needing no waste stream, the MP5™ allows for many different installation and monitoring alternatives.

“In 40 years of Drinking Water plant experience, I have never seen anything as impressive as the MP5™. The flexibility, functionality, and stability are unmatched. Period.”  
– Drinking Water Systems Engineer



It can be inserted directly into a pipe, installed in a PVC tee, immersed in a clearwell,  or simply dropped into a tank. An optional battery-powered package and existing telemetry options create the ultimate remote monitoring solution, allowing you to monitor dead ends, water quality hot spots, and water aging without wasting treated water.



Multiple Sensors in One, Without Membranes, Reagents, or Increased Maintenance.


No matter the process control, old-tech analyzers incur significant costs, weighing your budget down with flow control, tubing kits, membranes, reagents, and the time spent on maintenance and calibrations. The sooner the old tech is replaced, the faster savings are recouped.

Water treatment plant team



ハロゲンシステムズ社 - MP5 NSF-61 アンペロメトリック塩素センサーのラインアップ。



Saves Water, Lowers Operating Costs, and Expands Installation Options

NSF-61 and EPA Method 334.0

The MP5™ is the only Chlorine Sensor certified for NSF-61 in-pipe installations for drinking water with no waste stream and is EPA Method 334.0 compliant. Drinking water plants can save millions of gallons of treated water per year with approved compliance monitoring and reporting. 

Reduced Operating Costs




The MP5™ has a small footprint, is flow independent, and is NSF-61 compliant. Operators can insert a sensor in a pipe or PVC tee, suspend it in a trough, or simply drop it in a tank. Remote monitoring kits further expand installation options so boards like the one above can be cleaned up and cleared out.




Monitor 5 parameters directly in drinking water pipes at flows from 0- 4m/s & up to 10 bar/150 psi. A retractor/removal tool is available (pictured at left). Wet Tap (or Hot Tap) housing can be deployed as a retractable NSF-61 in-pipe Chlorine analyzer.



The mid-flange housing (H1MF-P) and the associated 2″ adapter sleeve and collar kit make for an easy sidestream NSF-61 PVC Tee deployment. This configuration fits an OTS 2” PVC Tee and requires a  threaded adapter (PT-01). 


ハロゲンMP5アンペロメトリック塩素センサ NSF-61 水没およびフローセルでの展開

The low-flange model (H1LF-P) adapts for sidestream monitoring and can replace an existing control-board-mounted sensor, or be submerged in clearwell. Optional Flow Cell kit.  Submersible deployments use a standard 1” PVC Boom Mount.