MP5 System
- 홈
- MP5 System
MP5 System
- 홈
- MP5 System
The MP ™ Series Multiparameter Sensor Platform
The only Chlorine Analyzer that saves 70,000 gallons non-revenue water per year -NO WASTE STREAM
Saves Water $400 to $1000 per year non-revenue water
Certified to NSF61 for drinking water exposure
Flow and pressure independent (even zero flow)
Maintenance free for 6 to 12 months
Plus they
Measures, Free Chlorine, pH, conductivity, temperature
No maintenance since it is:
흐름 독립적
Operates effectively regardless of flow rate changes.
셀프 클리닝
Minimizes maintenance by automatically cleaning itself.
Multi-parameter
Measures up to five parameters, enhancing monitoring capabilities.
Installation Options
High pressure Wet Tap uses conventional wet tapping equipment
01
Side stream can return water back to tank or process
02
Tank immersion kit
03
MP5™ 염소 분석기
NSF-61 Certified and EPA Method 334.0 Compliant, Halogen’s MP5™ sensor sets a new standard for amperometric chlorine analyzers. Unaffected by flow or pressure and needing no waste stream, the MP5™ allows for many different installation and monitoring alternatives.
전류 측정 염소 센서의 새로운 표준
In 40 years of Drinking Water plant experience, I have never seen anything as impressive as the MP5™. The flexibility, functionality, and stability are unmatched. Period.
Drinking Water Systems Engineer
NSF-61 Certified and EPA Method 334.0 compliant, Halogen’s MP5™ sensor sets a new standard for amperometric chlorine analyzers. Impervious to changes in flow or pressure and needing no waste stream, the MP5™ allows operators to use many different installation and monitoring alternatives. It can be inserted directly into a pipe, installed in a PVC tee, immersed in a clearwell, or simply dropped into a tank. An optional battery-powered package and existing telemetry options create the ultimate remote monitoring solution, allowing you to monitor dead ends, water quality hot spots, and water aging without wasting treated water. See below for our standard packages. Custom packages tailored to environment/plant-specific needs are available.
Direct insertion with no required waste stream or flow-control piping
오래된 기술 센서로 인한 비용 손실
No matter the process control, old-tech analyzers incur significant costs, weighing your budget down with flow control, tubing kits, membranes, reagents, and the time spent on maintenance and calibrations. The sooner the old tech is replaced, the faster savings are recouped.
MP5™로 TCO 절감
MP5™를 1년 동안 운영하는 데 드는 비용은 얼마인가요? 첫해 운영 비용은 약 $200입니다. 이 장치는 공장에서 보정된 상태로 배송되며 몇 분 안에 안정화되고 수개월 동안 보정 상태를 유지합니다. 멤브레인이나 시약을 구매할 필요가 없으며 유지보수가 거의 필요하지 않습니다.
단순성 추가, 유연성 확보
MP5™는 멤브레인이나 시약을 구입하거나 교체할 필요가 없고 복잡한 유량 제어 배관이나 폐수 라인도 필요하지 않으므로 작업이 간편합니다. 엔지니어와 작업자 모두 유연한 설치 옵션, 낮은 유지보수 요구 사항, 뛰어난 교정 안정성을 높이 평가합니다.
PVC Tee Installation Option
Saves Water, Lowers Operating Costs, and Expands Installation Options
The MP5™ is the only Chlorine Sensor certified for NSF-61 in-pipe installations for drinking water with no waste stream and is EPA Method 334.0 compliant. Drinking water plants can save millions of gallons of treated water per year with approved compliance monitoring and reporting.
Reduced Operating Costs
설치 후 할로겐 장비를 실행하는 데 드는 비용은 멤브레인과 시약을 사용하는 평균 DPD 또는 센서의 일부에 불과합니다. 멤브레인이나 시약을 구입하여 비축할 필요도 없고, 지속적인 보정이 필요하지 않으며, 복잡한 유량 제어 배관을 유지 관리할 필요도 없습니다.
간단하고 유연한 설치
The MP5™ has a small footprint, is flow independent, and is NSF-61 compliant. Operators can insert a sensor in a pipe or PVC tee, suspend it in a trough, or simply drop it in a tank. Remote monitoring kits further expand installation options so boards like the one above can be cleaned up and cleared out.
Configuration & Deployment Types Wet Tap, Direct Monitoring
Monitor 5 parameters directly in drinking water pipes at flows from 0- 4m/s & up to 10 bar/150 psi. A retractor/removal tool is available (pictured at left). Wet Tap (or Hot Tap) housing can be deployed as a retractable NSF-61 in-pipe Chlorine analyzer.
PVC 티(중간 플랜지) 구성
The mid-flange housing (H1MF-P) and the associated 2″ adapter sleeve and collar kit make for an easy sidestream NSF-61 PVC Tee deployment. This configuration fits an OTS 2” PVC Tee and requires a threaded adapter (PT-01).
Submersible Options
The low-flange model (H1LF-P) adapts for sidestream monitoring and can replace an existing control-board-mounted sensor, or be submerged in clearwell. Optional Flow Cell kit. Submersible deployments use a standard 1” PVC Boom Mount.
