Use the NSF-61 capable MP5 chlorine analyzer to monitor chlorine and other parameters at remote tanks, distribution trunks, or end-of-line areas in the water grid.
Because traditional chlorine sensors require frequent maintenance, analyzing chlorine residuals across a water grid or in remote tanks has long been a highly manual process, requiring truck roll-outs and grabbing samples.
Unlike maintenance-intensive sensors, Halogen’s MP5™ Chlorine Sensor is self-cleaning and has been shown to maintain stable calibration for months in drinking water applications. In addition, the MP5™ is the only chlorine analyzer approved for NSF-61 use in drinking water tanks or pipes with no required waste stream.
Halogen has remote monitoring solutions that combine any MP5 with a battery and cellular-enabled remote telemetry. For remote tank operations, the MP5™ can be suspended in a tank, inserted in the fill pipe, or deployed at the outflow. In a similar fashion, MP5™ sensors can be deployed throughout a water grid without needing the electrical grid.
Operators can measure free chlorine, pH, temperature, conductivity, and ORP at nearly any point in the grid that has a cell signal.
The NSF-61 certified, Halogen MP5™ measures 5 testing parameters in near-time using one online unit without losing a drop of treated water. Operators can assess free chlorine, pH, temperature, conductivity, and oxidation-reduction potential (ORP) in near-time in the pipe with no waste stream.
The MP5™ analyzer makes things simple. Our NSF-61 certification means no flow-control plumbing and no waste stream to mitigate. There are no reagents or membranes to stock, manage, or replace. Instead, you’ll replace the cap, cleaning beads, and impeller blade once per year in 5 minutes without affecting the calibration.
MP5™几乎能适应任何流量或压力。即使是干燥的管道也不会破坏校准结果。它可以直接安装在管道中，位于侧流，悬挂在水槽中，或简单地丢在水箱中。无论部署类型或参数如何，MP5™在精确度、可靠性和稳定性方面都是独一无二的。
Amperometric Sensors have many advantages over the older membrane and reagent technology. Halogen’s implementation of bare 3-electrode amperometric technology provides pH-stabilized precise measurements of Free Chlorine without introducing additional complexity to your workflow.
The old amperometric technology used by competitor sensors still requires a membrane and electrolyte to guard against sensor fouling. Such membranes are sensitive to flow and pressure spikes. Halogen’s patented SensiCLĒNE™ technology prevents fouling without introducing pressure or flow sensitivity.
Kit with flow-cell deployment (H1LF-P) and display controller along with a wall mounting plate, provides a drop-in upfit sensor replacement.
Retractable remover kit for MP5™ wet-tap analyzer (H1WT-P) in water pipes allows for maintenance without interrupting flows.
This deployment uses a water-proofed low-flange MP5™ (H1LF-P), a sourced boom and harness, or can simply be placed in a tank or trough.
Combine a mid-flange MP5™ (H1MF-P) with an adapter sleeve—in PVC or Stainless steel—sized for deployments in a 2″ PVC tee.
Fits low-flange MP5™ (H1LF-P) and adapts for side stream and control board usage based on which flow cell type is ordered.
Both 24V DC (D1) and 120-240V AC (CN-01) versions feature (4) 4-20 Ma analog outputs, and an M-12 Connector with stress relief.
If the technologies and benefits listed above raise any questions, you may find the answer you’re looking for in the FAQ or Technologies pages.
Our contact page also allows you to reach out with a specific question and we’ll get back to you as quickly as possible.