Municipal Drinking Water plants have been frustrated by the difficulty of accurately reading the monochloramine residual in their treated water for decades. Staying on the right side of the chlorine breakpoint curve has always been a delicate balance… until now
The MP-Mono™ accurately measures True Free Chlorine without interference from monochloramine and monochloramine without interference from dichloramine and trichloramine for precise control over the chloramination processes. Certified for NSF-61 installations, Halogen’s MP-Mono™, like the MP5-A™ Free Chlorine sensor, has a built-in impeller that generates a consistent flow across the diodes, capturing accurate and consistent readings. This same impeller excites cleaning beads in the sensor’s tip, allowing the patented cleaning system to clean the sensor surface. Because this sensor is flow-independent, self-cleaning, and does not need any waste stream, it can be installed virtually anywhere: inserted directly into a drinking water pipe, suspended in a trough, or dropped into a tank.
The NSF-61 certified Halogen MP-Mono™ analyzer measures monochloramine and free chlorine in under two minutes using one online unit without wasting one drop of treated water. Operators can know where their monochloramine, free chlorine, pH, temperature, conductivity, and even control chemical feed with the D-20 Controller.
The MP-Mono™ adapts to nearly any flow or pressure. Even a dry pipe won’t ruin the calibration. It can be installed directly in a pipe, located side-stream, suspended in a trough, or dropped in a tank. Whatever the deployment type or parameters, the MP-Mono™ is unique in accuracy, reliability, and stability.
The MP-Mono™ makes things simple. Our NSF-61 certification means no flow-control plumbing and no waste stream to mitigate. There are no reagents or membranes to stock, manage, or replace. Instead, you’ll replace the cap, cleaning beads, and impeller blade once per year in 10 minutes without affecting its calibration.
An old-tech monochloramine sensor combined with a free-chlorine sensor requires around 138,000 gallons of flow per year to capture its readings. In areas subject to water restrictions, that is a lot of waste, but even in areas where water is plentiful, the treatment costs and maintenance headaches can all be avoided with the MP-Mono™.
Installed directly in-pipe and unaffected by flow and pressure —even a dry pipe won’t throw off the calibration— the MP-Mono™ is a dream for operators with remote tanks. Combined with our battery-powered cellular reporting solution for the ultimate remote tank sensor solution.
플랜트 운영자는 멤브레인, 시약 및 전해질에 얼마나 많은 비용이 지출되는지 정확히 알고 있습니다. 하지만 기존 구식 센서의 유지보수 및 후속 교정에 얼마나 많은 시간이 소요되는지는 명확하지 않을 수 있습니다. 이러한 작업 시간은 빠르게 누적됩니다. 반면, MP5™는 공장 출고 시 보정된 상태로 제공되며 설치 후 5분 이내에 안정화됩니다. 멤브레인, 시약 또는 전해질이 필요하지 않을 뿐만 아니라 매월 유지보수할 필요도 없습니다. 플랜트에서는 수개월 동안 캘리브레이션이 지속됩니다. 이러한 단순성은 곧바로 수익으로 이어집니다.
The operators and staff in this program were pleasantly surprised at just how little maintenance has been needed. “Sensor calibration is performed initially and has not been required in over six months…manpower savings are … an estimated savings of 2,080 man-hours per year for five sensors.” <read more>
With patented tech created to solve the environmental impact issues dogging the maritime shipping industry, Halogen has created a solution that solves problems many wastewater plant operators had written off as “the way things are.” The Halogen MP-Mono™ and MP5-A™ are designed to let those same operators work within a new paradigm.
